Ricoh Plockmatic SquareBack Trimmer - Tools Menu Functions; Tools Menu Overview; Square Back Fine Adjustment

CIP Training Plockmatic SquareBack Trimmer
Tools
The Tools Menu
Square Back Fine Adjustment
Tools
The Tools sub-menu contains a number of
options that will allow the user to:
• Fine adjust settings for the Square
Back option,
• View and reset the counter,
• Choose the Units,
• Select the language,
• View the Software Version installed
on the machine.
The Service Mode is to be used only by
authorized technicians.
Square Back Fine Adjustment
Press [Square Back Fine Adjust] to
get to the Fine Adjustment sub-menu.
This function works as a pre-adjustment
for the Square Back function and
should be used only if the regular
adjustment of the Square Back of the
booklet does not give the expected
results (see sections 2 and 3 of this
manual).
If the machine produces a too
sharp or too soft fold on the
booklets, the user can lower or
increase its Square Back preset by
pressing [+] for sharper edges and [-]
for softer edges.
Press the Green Check mark
to confirm the changes and return
to the previous menu. Otherwise,
press the red cross to discard
changes and return to the previous
menu.