CIP Training Plockmatic SquareBack Trimmer
What You Can Do With This Machine
The Plockmatic SquareBack Trimmer is a machine that allows for Squarefolding and Trimming of
booklets.
Stapled booklets are fed in the machine from the upstream device through the Transport
Module and are delivered on the Stacker.
The user has also the possibility to Manual Feed booklets into the machine through the manual
hand-feed opening, thus using the Main Module as a stand-alone machine.
When the booklets are fed into the Main Module, an align module transports them into the
trimming area, where trims on the sides of the booklets are performed.
Finally, the booklets get squarefolded and fed out on the belt stacker.
Stacker Main Module Transport Module
Manual Feed
Opening
To Next Page
Loading...
