CIP Training Plockmatic SquareBack Trimmer
Maintaining Your Machine
Never attempt any maintenance function that is not specifically described in this documentation.
The sensors need to be cleaned regularly when in use and if the unit has not been used for a
period of time.
Sensors must be wiped clean with a lint free cloth.
CAUTION:
Never use cleaning fluids on sensors.
WARNING:
•
Turn the machine off before cleaning the sensors;
• The trim unit has two sharp knives for trimming booklets: make sure not to touch them
when cleaning the sensors.
Cleaning the sensors
Sensors’ location
Q20 Q13 Q14
Interlock sensor
To Next Page
Loading...
