Messages Causes Solutions
"Collate has been cancelled." Collate was canceled. Turn off the power, and then
back on again. If the message
appears again, contact your
service representative.
"Exceeded the maximum unit
count for Print Volume Use. The
job has been cancelled."
The number of pages the user is
permitted to print has been
exceeded.
For details about Print Volum.
Use Limit., see Security Guide
.
"Exceeded the maximum
number of multi-sheet fold. The
job has been cancelled."
The maximum number of Multi-
sheet Fold was exceeded.
Specify fewer sheets for the
Multi-sheet Fold function. For
details about the maximum
number of Multi-sheet Fold, see
"Specifications for Multi-Folding
Unit", Maintenance and
Specifications .
"Fold is not available with the
settings. The job has been
cancelled."
Fold function is not available
with the current settings.
Check the paper settings. For
details about the limitations of
the Fold function, see "Fold",
Print .
"Receiving data failed." Data reception was aborted. Resend the data.
"Sending data failed." The machine received a
command to stop transmission
from the printer driver.
Check if the computer is
working correctly.
"The selected paper size is not
supported. This job has been
cancelled."
Job Reset is automatically
performed if the specified paper
size is incorrect.
Specify the correct paper size,
and then print the file again.
"The selected paper type is not
supported. This job has been
cancelled."
Job Reset is automatically
performed if the specified paper
type is incorrect.
Specify the correct paper type,
and then print the file again.
"Z-fold error." Z-folding was canceled. Check the tray, paper
orientation, print orientation,
and Z-fold settings again.
9. Troubleshooting
188
To Next Page
Loading...
