When there is a problem with the print settings
Messages Causes Solutions
"Booklet/Half Fold Error" The job was canceled because
you specified invalid settings for
saddle stitching or Half Fold.
Check the settings for saddle
stitching or Half Fold.
"Classification Code is
incorrect."
The Classification Code has not
been entered, or has been
entered incorrectly.
Enter the correct Classification
Code.
"Classification Code is
incorrect."
The Classification Code is not
supported with the printer
driver.
Select [Optional] for
"Classification Code". For
details about how to specify
Classification Code settings, see
"Configuring Classification
Codes", Print .
"Duplex has been cancelled." Duplex printing was canceled. • Select the proper paper
size for the duplex
function. For details about
proper paper sizes, see
"Specifications for the
Main Unit", Maintenance
and Specifications .
• Change the setting for
"Apply Duplex" in [Tray
Paper Settings] to enable
duplex printing for the
paper tray. For details
about setting "Apply
Duplex", see "Tray Paper
Settings", Paper Settings
.
"Exceeded max. pages. Collate
is incomplete."
The number of pages exceeds
the maximum number of sheets
that you can use Collate with.
Reduce the number of pages to
print.
Messages Displayed When Using the Printer Function
189
To Next Page
Loading...
