Ricoh Pro 8100S - Messages Displayed When Using the Scanner Function

Messages Causes Solutions
"Print overrun." Images were discarded while
printing.
PCL 6
Select a lower resolution
on the printer driver. For
details about how to
change the resolution
setting, see the printer
driver Help.
PostScript 3
Select a lower resolution
on the printer driver. For
details about how to
change the resolution
setting, see the printer
driver Help.
"Punch has been cancelled." Punch printing was canceled. Check the paper orientation,
print orientation, and punch
position. Certain settings can
produce print results that might
not be as expected.
"Ring Binding is not available
with the settings."
Ring Binding is not possible
under the settings that you have
specified.
Check the current settings. For
details about which functions
are not available when Ring
Binding is specified, see "Notes
on Configuring the Ring
Binding", Print .
"Staple has been cancelled." Stapling printing was canceled. Check the paper orientation,
paper quantity, print
orientation, and staple position.
Certain settings can produce
print results that might not be as
expected.
Messages Displayed When Using the Printer Function
191