Messages Causes Solutions
"You do not have a privilege to
use this function. This job has
been cancelled."
The logged in user is not
allowed to use the selected
function.
For details about how to set
permissions, see Security Guide
.
"You do not have a privilege to
use this function. This operation
has been cancelled."
The logged in user does not
have the privileges to register
programs or change the paper
tray settings.
For details about how to set
permissions, see Security Guide
.
When a user cannot be registered
Messages Causes Solutions
"Auto-registration of user
information has failed."
Automatic registration of
information for LDAP
Authentication or Windows
Authentication failed because
the Address Book is full.
For details about automatic
registration of user information,
see Security Guide .
"Information for user
authentication is already
registered for another user."
The user name for LDAP or
Integration Server
authentication was already
registered in a different server
with a different ID, and a
duplication of the user name
occurred due to a switching of
domains (servers), etc..
For details about user
authentication, see Security
Guide .
When other errors occur
Messages Causes Solutions
"98: Error" The machine could not access
the hard disk correctly.
Turn off the power, and then
back on again. If the message
appears frequently, contact
your service representative.
Messages Displayed When Using the Printer Function
195
To Next Page
Loading...
