Messages Causes Solutions
"Failed to obtain file system." PDF direct printing could not be
performed because the file
system could not be obtained.
Turn off the power, and then
back on again. If the message
appears again, contact your
service representative.
"File system is full." PDF file does not print out
because the capacity of the file
system is full.
• Delete all unnecessary files
from the hard disk.
• Decrease the file size sent
to the machine.
"Folding Unit Error." There is a problem with the
multi-folding unit.
Contact your service
representative.
"I/O buffer overflow." An input buffer overflow
occurred.
• In [Printer Features], under
[Host Interface], select
[I/O Buffer], and then set
the maximum buffer size to
a larger value.
• Reduce the number of files
being sent to the machine.
Messages Displayed When Using the Printer Function
197
To Next Page
Loading...
