Messages Causes Solutions
"Exceeded max. page capacity
per file. Press [Send] to send the
scanned data, or press [Cancel]
to delete."
The number of scanned pages
exceeded the maximum page
capacity.
Select whether to send the data
that has already been scanned.
"Exceeded maximum number of
file to store. Delete all
unnecessary files."
Too many files are waiting to be
delivered.
Try again after they have been
delivered.
When the WSD scanner function cannot be used
Messages Causes Solutions
"Cannot communicate with PC.
Contact the administrator."
WSD (Device) protocol or WSD
(Scanner) protocol is disabled.
For details about how to enable
or disable the WSD protocol,
see Security Guide .
"Cannot start scanning because
communication was failed."
Scan Profile is not set on the
client computer.
Set Scan Profile. For details
about how to do this, see
"Creating a New Scan Profile",
Scan .
"Cannot start scanning because
communication was failed."
The [Take no action] setting has
been selected on the client
computer, forcing the client
computer to remain inactive
when it receives scan data.
Open scanner properties, click
the [Events] tab, and then select
[Start this program] as the
computer's response on receipt
of scan data. For details, see
your operating system's Help.
"Cannot start scanning. Check
the setting(s) on the PC."
The Scan Profile might be
incorrectly configured.
Check the Scan Profile
configuration.
Messages Displayed When Using the Scanner Function
207
To Next Page
Loading...
