When data cannot be sent because a currently used file is selected
Messages Causes Solutions
"Selected file is currently in use.
File name cannot be changed."
You cannot change the name of
a file whose status is "Waiting..."
or that is being edited with
DeskTopBinder.
Cancel transmission
("Waiting..." status cleared) or
the DeskTopBinder setting, and
then change the file name.
"Selected file is currently in use.
Password cannot be changed."
You cannot change the
password of a file whose status
is "Waiting..." or that is being
edited with DeskTopBinder.
Cancel transmission
("Waiting..." status cleared) or
the DeskTopBinder setting, and
then change the password.
"Selected file is currently in use.
User name cannot be changed."
You cannot change the sender's
name whose status is
"Waiting..." or that is being
edited with DeskTopBinder.
Cancel transmission
("Waiting..." status cleared) or
the DeskTopBinder setting, and
then change the user name.
"Some of selected files are
currently in use. They could not
be deleted."
You cannot delete a file which is
waiting to be transmitted
("Waiting..." status displayed) or
whose information is being
changed with DeskTopBinder.
Cancel transmission
("Waiting..." status cleared) or
the DeskTopBinder setting, and
then delete the file.
When data cannot be sent because there are too many documents or pages
Messages Causes Solutions
"Exceeded max. number of
pages per file. Do you want to
store the scanned pages as 1
file?"
The file being stored has
exceeded the maximum number
of pages for one file.
Specify whether to store the
data or not. Scan the pages that
were not scanned, and then
store them as a new file. For
details about storing files, see
"Storing and Saving the
Scanned Documents", Scan .
"Exceeded max. number of
stored files. Cannot send the
scanned data as capturing files
is unavailable."
Too many files are waiting to be
delivered.
Try again after they have been
delivered.
9. Troubleshooting
206
To Next Page
Loading...
