Ricoh Pro 8210 User Manual

6. Fusing Unit
Before You Begin
• The fusing unit becomes extremely hot during operation. To prevent minor burns, allow the
machine to cool for at least 30 minutes before you remove the fusing unit.
• The fusing unit weighs approximately around 17.0 kg (37.5 lb).
• When moving the fusing unit, lift it slowly and be careful not to strain yourself. Careless
handling or over-exertion when lifting can result in breakage of the unit or injury to yourself.
What You Need
• Hex screwdriver
• Newspaper or other paper
Time for Replacement
A message will appear when it nears the time to replace a component.
Print the counter list.
1. Press the [Counter] key and print out the counter list.
See page 16 "Control Panel".
2. Turn the machine off.
See page 17 "Turning Off/On the Power".
Replaceable Parts
1
2
CZC100
1. Fusing assembly
107

Ricoh Pro 8210 Specifications

General

Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 300, 000 pages
Print Technology	Laser
Supported Operating Systems	Windows, macOS, Linux
Warranty	1 year
Connectivity	Ethernet, Wi-Fi (optional)
First Print Speed	4.5 seconds
Duplex Printing	Automatic