CIP Training Pro C5200 series
Throughput
7
3
4
5
8
6
1
2
1. ADF
Lower the ADF over originals placed on the exposure glass.
If you load a stack of originals in the ADF, the ADF will automatically feed the originals
one by one.
The ADF scans both sides of an original simultaneously.
2. Exposure glass Place originals face down here.
3. Control panel
4. Front cover Open to change toner cartridges.
5. Drawer Pull out the drawer when a paper jam occurs.
6. Paper trays (Trays 1–3)
7. Lower front cover Open to change the waste toner bottle.
8. Main power switch
To operate the machine, the main power switch must be on. If it is off, open the main power
switch's cover and turn the switch on.
Startup and Shutdown.
To Next Page
Loading...
