Registering a New Custom Paper by Modifying an Existing Paper
You can open and modify the settings of a registered custom paper and register them as a new custom paper.
This function is useful when registering paper that is the same type as an existing paper, but a different size.
When modifying a custom paper that is registered from the master library, you can change its [Custom Paper Name],
[Paper Size], [Apply Duplex], and [Apply Auto Paper Select] settings.
1. Press the [Paper Setting] key.
2. Press [Edit Custom Paper].
3. Press [New Program].
4. Press [Use Another Custom Paper's Settings].
5. Select the custom paper whose settings you want to modify.
6. Press [OK].
7. Change the settings for custom paper (such as paper's name, size, and type), as necessary.
If you change the [Paper Weight], [Paper Type], [Coated Paper Type], [Paper Color], [Prepunched or Not],
or [Textured or Not] and press [OK], a message appears to notify you that the [Advanced Settings] will be
initialized. To apply the changes for those settings, select [Change]. To cancel the changes, select [Do not
Change].
8. Press [OK].
9. Press [Exit].
10. Press the [Paper Setting] key.
CIP Training Pro C5200 serieser
Paper Catalogue
To Next Page
Loading...
