8. Select the program number of the custom paper profile you wish to adjust.
9. Press [Down arrow key].
10. Press [Change] for "Advanced Settings".
The advanced settings for custom paper adjustment appear.
Manual Adjustment of the registration.
All adjustments are between 3.0mm to -3.0mm in 0.1mm steps.
001. Image Position Side 1 Across Feed
002. Image Position Side 2 Across Feed
003. Image Position Side 1 With Feed
004. Image Position Side 2 With Feed
CIP Training Pro C5200 series
Image Position (registration)
7. Press [Edit Custom Paper].
Touch to execute.
Press OK to finish.
To Next Page
Loading...
