Ricoh Pro C7100

Message Cause Solution
"Duplex Cancelled" Duplex printing was canceled. • Select an appropriate
paper size for the duplex
function. For details about
paper, see "Specifications
for the Main Unit",
Maintenance and
Specifications.
• Change the setting for
"Apply Duplex" in [Tray
Paper Settings] to enable
duplex printing for the
paper tray. For details
about setting "Apply
Duplex", see "Tray Paper
Settings", Paper Settings.
"Exceeded Max. Pages
(Collate)"
The number of pages exceeds
the maximum number of sheets
that you can use Collate with.
Reduce the number of pages to
print.
"Exceeded the maximum
number of multi-sheet fold (Half
Fold)."
The maximum number of multi-
sheet folds (Half Fold) was
exceeded.
For details about the maximum
number of multi-sheet folds (Half
Fold), see "Fold", Print.
"Output Tray Changed" The output tray was changed
because the paper size of the
specified output tray is limited.
Specify the proper output tray.
"Perfect Binding is not available
with the settings."
Perfect Binding is not possible
under the settings that you have
specified.
Check the current settings. For
details about which functions
are not available when Perfect
Binding is specified, see "Perfect
Binding", Print.
Messages Displayed When You Use the Printer Function
119