• The default period the machine waits before entering Low Power mode is 15 minutes. This
default time can be changed.
Sleep mode
• If this machine remains idle for a specified period or when the [Energy Saver] key is pressed, it
enters Sleep mode to further reduce its electrical consumption.
• The default delay time the machine waits before entering Sleep mode is 60 minutes. This
default time can be changed.
• The machine can print jobs from computers while in Sleep mode.
Specification
Type 1 Type 2 Type 3 Type 4
Reduced electrical
consumption in Low Power
mode
*1
293 W 293 W 293 W 293 W
Time of switch into Low
Power mode
15 minutes 15 minutes 15 minutes 15 minutes
Time of switch out from
Low Power mode
*1
26 seconds 26 seconds 26 seconds 26 seconds
Reduced electrical
consumption in Sleep
mode
*1
2.0 W 2.0 W 2.0 W 2.0 W
Time of switch into Sleep
mode
60 minutes 60 minutes 60 minutes 60 minutes
Time of switch out from
Sleep mode
*1
298 seconds 298 seconds 298 seconds 298 seconds
Duplex Function
*2
Standard Standard Standard Standard
*1
The time it takes to switch out from energy saving functions and electrical consumption may differ
depending on the conditions and environment of the machine.
*2
Achieves ENERGY STAR energy savings; product fully qualifies when packaged with (or used with) a
duplex tray and the duplex function is enabled as an option.
• Specifications can vary depending on which options are installed on the machine.
• For details about how to change the default interval, see "Timer Settings", Connecting the
Machine/ System Settings.
7. Information for This Machine
130
To Next Page
Loading...
