Changing a user name
1. Press [Select Stored File].
2. Specify the folder in which to save the stored files.
3. Press [Manage / Delete File].
4. Select the file containing the user name you want to change.
If you select a password-protected stored file, a screen for entering the password appears.
Enter the password, and then press [OK].
5. Press [Change User Name].
6. Enter a new user name.
The user names shown here are names that were registered in the address book. To change a
user name not shown here, press [Manual Entry], and then enter the user name.
7. Press [OK].
8. Make sure that the user name was changed.
9. Press [Reset].
• Using Web Image Monitor you can also change the user name of a file stored in the machine
from the client computer. For details about Web Image Monitor, see Web Image Monitor
Help.
Storing and Saving the Scanned Documents
391
To Next Page
Loading...
