4. Destination field
The specified destination is displayed here. You can specify only one destination.
5. Destination list
The list of available destinations is displayed here.
If all of the destinations cannot be displayed, press [ ] or [ ] to move through the list.
6. Original and scanning settings
Allows you to specify scan settings and original feed types.
[Select Stored File] screen under the scanner function
This section describes how the list of stored files is displayed.
To display stored files, press Select Stored File on the initial scanner display. You can organize files
stored in folders. You can view a list of the files in a folder by touching the folder key.
Folder list screen
4. Getting Started
126
To Next Page
Loading...
