8. Press [Close].
9. Press [Home] ( ) at the bottom of the screen in the center.
When the Printed Color Differs From the Original Color
If a certain color is strong or the color of the copy differs from the original, adjust the yellow, magenta,
cyan and black balance.
Auto color calibration
1. Press [Home] ( ) at the bottom of the screen in the center.
2. Press the [User Tools] icon ( ).
3. Press [Machine Features].
4. Press [Maintenance].
5. Press [Auto Color Calibration].
6. Press [Start].
To perform auto color calibration using the copy function, press [Start] in Copier Function. To
perform auto color calibration using the printer function, press [Start] in Printer Function.
7. Press [Start Printing].
8. When using the printer function, select the item to calibrate, and then press [Start
Printing].
9. Place the test pattern on the exposure glass, and then press [Start Scanning].
• The test pattern will not be read if it is set into the ADF.
• The test pattern will be printed on an A4, 8
1
/
2
11 size page. If these sheets are not available,
A3 or B4 JIS (Japanese Industrial Standard) will be used. Make sure to check the paper set into the
paper tray.
• Set the test pattern in the following way:
Adjusting the Color Registration Shift or Printed Color
517
To Next Page
Loading...
Need help?
General
