Basic Procedure When Using Scan to Folder
• Before performing this procedure, see page 359 "Preparation for Sending by Scan to Folder" and
confirm the details of the destination computer. See also "Registering Folders", Device
Management, and register the address of the destination computer to the address book.
1. Press [Home] ( ) at the bottom of the screen in the center.
2. Press the [Scanner (Classic)] icon.
3. Make sure that no previous settings remain.
If a previous setting remains, press [Reset].
4. Press the [Folder] tab.
5. Place originals.
6. If necessary, specify the scan settings according to the original to be scanned.
Example: Scanning the document in color/duplex mode, and saving as a PDF file.
Basic Procedure When Using Scan to Folder
365
To Next Page
Loading...
