No. Item Description
0501 Execute Process
Adjustment
Execute the following adjustments for printing at once:
• image density, color deviation, charge roller
cleaning, charge bias, and transfer current
correction
0502 Screw-on Cap to Replace Close the Toner Bottle Cap.
Open the toner bottle cover (the cover of the toner
dispensing section) before executing this function.
Afterward, remove the toner bottle by pushing the knob
below the bottle.
0503 Execute Charge Roller
Cleaning
Cleans the Charge Roller.
0507 Execute Developer
Refreshing
Replace some of the liquid developer in the development
unit.
0509 Smooth Fusing Belt Smooth the Fuser Belt to remove vertical and horizontal
lines from the printouts.
0510 Fusing Belt Smoothing
Setting
Specify the condition to execute Fuser Belt smoothing.
0511 Fuser Unit Speed
Adjustment
Correct the deviation in the rotation speed of the Fuser
Unit.
0514 Temperature / Humidity
Inside
Display the internal temperature and humidity.
0515 Temperature / Humidity
Outside
Display the external temperature and humidity.
0517 Switch Print Screen Select the mode that appears when [To Print Screen] is
pressed: copier mode or printer mode.
0519 Display Parts Life Counter Display the usage rate of the spare parts.
Finishing: Finisher
For details about the following items, see page 303 "Finishing: Finisher".
7. Adjustment Settings for Operators
278
To Next Page
Loading...
