• Separation Sheets is specified.
• The staple function is specified.
• The punch function is specified.
• The fold function on multi-folding unit is specified.
• Ring Binding is specified.
• Perfect Binding is specified.
• The machine is printing a report.
• The half fold function cannot be used for the selected paper size or type.
• [Half Fold: Multi-sheet fold (Finisher Booklet Tray)] is specified but the paper sizes are
different.
• [Half Fold: Multi-sheet fold (Finisher Booklet Tray)] is specified but the number of sheets
exceeds the maximum folding number.
• No requirements for specifying collate are fulfilled.
• Booklet Finisher is malfunctioning.
• Booklet Finisher is not attached.
Functions that will be canceled when combined with the Half-fold function
The following functions will be canceled when combined with the Half-fold function:
• Ejecting paper with the printed side facing up
• If the information icon ( ) is displayed next to the "Fold:" list, you cannot specify Half Fold
function. Click the information icon ( ) to check why Half Fold function is unavailable.
• If the Half Fold function is specified, folded paper cannot be output with the printed side facing up.
• If you cannot make Half Fold function settings even with a Booklet Finisher installed, options may
not be set correctly in the printer driver. To correct the printer driver's option settings, see
"Configuring Option Settings for the Printer", Printer Driver Installation Guide.
3. Useful Functions
38
To Next Page
Loading...
