Message Cause Solution
"File being stored exceeded
max. number of pages per
file. Copying will be
stopped."
The scanned originals have
too many pages to store as
one document.
Press [Exit], and then store again with
an appropriate number of pages.
"Magazine or Booklet mode
is not available due to mixed
image mode."
You selected the
"Magazine" or "Booklet"
function for originals
scanned using different
functions, such as copy and
printer.
Make sure originals to which the
"Magazine" or "Booklet" function is
applied are scanned using the same
function.
"Maximum number of sets is
n."
("n" is replaced by a
variable.)
The number of copies
exceeds the maximum copy
quantity.
You can change the maximum copy
quantity from [Max. Copy Quantity] in
[General Features] under [Copier /
Document Server Features]. For details
about Max. Copy Quantity, see
"General Features", Preparation.
"Memory is full. nn originals
have been scanned. Press
[Print] to copy scanned
originals. Do not remove
remaining originals."
("n" is replaced by a
variable.)
The number of scanned
originals exceed the number
of pages that can be stored
in memory.
Press [Print] to copy scanned originals
and cancel the scanning data. Press
[Clear Memory] to cancel the scanning
data and not copy.
"Perfect Binding is not
available for different paper
sizes."
Mixed Sizes mode is
specified.
Cancel Mixed Sizes mode, or specify
the Auto Reduce / Enlarge function.
"Perfect Binding is not
available with the settings."
Perfect Binding is not
possible under the settings
that you have specified.
Check the current settings. For details
about which functions are not
available when Perfect Binding is
specified, see "Perfect binding", Basic
Operations.
"Perfect Binding is not
available with this finishing
size."
Perfect Binding cannot be
used with the finishing size
that you have specified.
Select a proper finishing size. For
details about proper finishing sizes, see
"Specifications for Perfect Binder",
Specifications.
When Messages Appear
429
To Next Page
Loading...
