Message Cause Solution
"Error occurred while
processing an
Unauthorized Copy
Prevention job. Job
cancelled."
In [Administrator Tools]
under [System Settings],
priority was specified to be
given to Unauthorized
Copy Prevention Printing
set on this machine.
Cancel Unauthorized Copy
Prevention Printing for the printer
driver. For details about how to
cancel the settings, see the printer
driver Help.
"Collate Cancelled" Collate was canceled. Turn off the power, and then back on
again. If the message appears
again, contact your service
representative.
"You reach the usage limit.
This job has been
cancelled."
The number of pages the
user is permitted to print
has been exceeded.
For details about print volume use
limitation, see "Managing Print
Volume per user", Security Guide.
"Exceeded the maximum
number of multi-sheet fold.
The job has been
cancelled."
The maximum number of
Multi-sheet Fold was
exceeded.
Specify fewer sheets for the Multi-
sheet Fold function. For details about
the maximum number of Multi-sheet
Fold, see "Specifications for Multi-
Folding Unit", Specifications.
"Fold is not available with
the settings. The job has
been cancelled."
Fold function is not
available with the current
settings.
Check the paper settings. For details
about the limitations of the Fold
function, see page 32 "Fold".
"Receiving data failed." Data reception was
aborted.
Resend the data.
"Sending data failed." The machine received a
command to stop
transmission from the
printer driver.
Check if the computer is working
correctly.
"Staple error occurred. The
job has been cancelled."
The job was canceled by
the job reset condition for
stapling.
Check the number of sheets to be
stapled together, and then try
printing again.
"Job cancelled because
mixture of paper sizes
detected."
The job was cancelled
because it contained
pages of mixed paper
sizes.
Open the front cover of the stacker,
and remove the paper.
When Messages Appear
437
To Next Page
Loading...
