8. Change the settings.
9. Press [Save Paper].
If you change the [Paper Weight], [Paper Type], [Coated Paper Type], [Paper Color],
[Prepunched], or [Textured] and press [Save Paper], a message appears to notify you that the
[Advanced Settings] will be initialized. To apply the changes for those settings, select
[Change]. To cancel the changes, select [Do not Change].
10. Press [Overwrite].
11. Press .
12. Press the [Home] ( ) icon at the center bottom of the screen.
• For details about custom paper settings, see page 57 "Custom Paper Settings".
• You cannot modify a custom paper that is assigned to a paper tray. To modify it, cancel the
assignment.
• For details about [Advanced Settings], contact your machine administrator.
Specifying a custom paper for paper trays with the Media Identification Unit
1. Press [Tray Paper Settings] in the upper left corner of the screen.
2. Press [Paper Tray] tab.
3. Select the tray to specify the paper settings.
4. Press [Paper Identification].
5. Insert paper into the Media Identification Unit, and then remove it.
Hold the edges of the paper with both hands when inserting the paper.
Keep the paper flat as you pull it out.
Registering Custom Paper
55
To Next Page
Loading...
