Ricoh PRO C7210X

1.SC Codes
352
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
SC756-
02
D
Ring Binder: Device connection order error
The ring binder did not detect the fixed device connection information command
at the initial communication.
 The interface cable connector disconnected/broken
 Board on the ring binder or a downstream device defective
 Replace the interface cable
 Reconnect the connector
 Replace the board on the ring binder or a downstream device
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
SC756-
10
D
Ring Binder: Junction gate abnormal
 Junction gate failed to move out of the home position within the prescribed
time (400 pulses). The first occurrence triggers a jam, the second an SC
code.
 The sensor could not detect the junction gate within the prescribed time (600
pulses). The first occurrence triggers a jam, the second an SC code.
 Path JG motor (M201) defective
 Motor overloaded
 Connector loose, broken, defective
 JG HP sensor (S203) defective
 Replace the motor
 Replace the sensor
 Replace the connector
 Reconnect the connector
 Replace the board
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
SC756-
20
B
Ring Binder: Pre-punch side fence HP error
 Thee sensor failed to detect that the component had moved out of the home
position within the prescribed time (400 pulses). The first occurrence triggers
a jam, the second an SC code.
 The sensor could not detect the component within the prescribed time (600
pulses). The first occurrence triggers a jam, the second an SC code.
 Side jogger motor (M302) defective
 Motor overloaded
 Connector loose, broken, defective
 Pre-punch jogger HP sensor (S302) defective