1.SC Codes
383
Error Name/Error Condition/Major Cause/Solution
1. Check that the power of the printer is ON.
2. Check that the cable between the DFE and the printer is properly connected,
and then restart the DFE and the printer according to the correct procedure.
Error Name/Error Condition/Major Cause/Solution
A file system access error occurred in the ASCII temporary disk cache
File access error in the ASCII temporary cache
1. Reboot the DFE.
2. Reinstall the DFE System.
Error Name/Error Condition/Major Cause/Solution
Page processing timeout in a print job
If the error is not solved by rebooting the DFE, there may be a problem with the
print job itself.
Error Name/Error Condition/Major Cause/Solution
Printer error 1 (WORK memory not acquired)
When an error is detected in the application, which makes continued operation
impossible.
Unexpected hardware configuration (such as insufficient memory)
Cycle the main power switch off and on.
Increase the memory storage capacity.
Error Name/Error Condition/Major Cause/Solution
Printer application error (Filter process not started)
When an error is detected in the application, which makes continued operation
impossible.
Unexpected hardware configuration (such as insufficient memory)
Cycle the main power switch off and on.
To Next Page
Loading...
