Ricoh PRO C7210X

1.SC Codes
50
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
SC395-
55
D
Drum motor error (K): Traction output shaft overload error
SC396-
55
D
Drum motor error (C): Traction output shaft overload error
SC397-
55
D
Drum motor error (M): Traction output shaft overload error
SC398-
55
D
Drum motor error (Y): Traction output shaft overload error
SC399-
55
D
Drum motor error (S): Traction output shaft overload error
Occurs if the status of the hole has changed, but the encoder signal has not
changed. The deceleration mechanism is slipping due to the overload on the
output shaft.
Malfunction due to abnormal increase in PCU torque (overload due to the cleaning
blade getting caught)
Clear the overload in the PCU