Ricoh PRO C7210X - Page 86

1.SC Codes
82
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
 Paper upper limit sensors 1 and 2
4. Replace the following harness(es).
 Lower Limit Sensor
 Paper Height Middle Sensor
 Paper upper limit sensors 1 and 2
5. Replace the electric parts listed below.
 Lower Limit Sensor
 Paper Height Middle Sensor
 Paper upper limit sensors 1 and 2
6. Replace the following mechanical component(s).
 Tray bottom plate
 Lift motor
 Feeler, etc.
7. Replace the Main Control Board of the LCIT.
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
SC504-
16
B
Vacuum Feed LCIT 1: 2nd Tray Error (Separation Front Fan error)
SC506-
16
B
Vacuum Feed LCIT 2: 2nd Tray Error (Separation Front Fan error)
SC508-
16
B
Vacuum Feed LCIT 3: 2nd Tray Error (Separation Front Fan error)
SC504-
17
B
Vacuum Feed LCIT 1: 2nd Tray Error (Separation Rear Fan error)
SC506-
17
B
Vacuum Feed LCIT 2: 2nd Tray Error (Separation Rear Fan error)
SC508-
17
B
Vacuum Feed LCIT 3: 2nd Tray Error (Separation Rear Fan error)
SC504-
18
B
Vacuum Feed LCIT 1: 2nd Tray Error (Float Fan error)
SC506-
18
B
Vacuum Feed LCIT 2: 2nd Tray Error (Float Fan error)
SC508-
18
B
Vacuum Feed LCIT 3: 2nd Tray Error (Float Fan error)
SC504-
19
B
Vacuum Feed LCIT 1: 2nd Tray Error (Separation Fan error)
SC506-
B
Vacuum Feed LCIT 2: 2nd Tray Error (Separation Fan error)