No. Item Description
0617 Output Fan Level Specify the air flow of the fan on the Shift Tray when
sheets are ejected and delivered to the Shift Tray of
Finisher SR5050 or Booklet Finisher 5060.
0618 Staple Position for Booklet Adjust the horizontal position of the booklet staples when
using Booklet Finisher SR5060.
0619 Folding Position for Booklet Adjust the horizontal position of the folding when using
Booklet Finisher SR5060.
0620 Paper Alignment for
Booklet: Across Feed
Adjust the width of the Staple Jogger
*1
when using
Booklet Finisher SR5060.
0621 Set Number of Folds for
Booklet
Specify the number of booklet folds to be performed
when using Booklet Finisher SR5060.
0622 Paper Alignment for
Booklet: With Feed
Adjust the Tip Stopper movement when using the booklet
binding function on Finisher SR5050 or Booklet Finisher
SR5060.
0623 Z-fold Skew Correction Select the method to correct the skew during Z-folding on
the fold unit.
0624 Amount of Z-fold Skew
Correction
Adjust the striking amount of paper during Z-folding
skew correction.
0625 Amount of Z-fold Skew
Correction: Reverse
Adjust the reverse rotation amount of Registration Roller
during Z-folding skew correction.
0626 Maximum No. Stacked
Sheets in Output Tray
Specify the number of sheets to stack on the Shift Tray at
the time of shift sorting.
*1 A guide for aligning output sheets. Paper is aligned at both ends.
Finishing: Fold
For details about the following items, see page 202 "Finishing: Fold".
No. Item Description
0701
Z-fold Position 1 Adjust the fold position of the end segment when using
the fold unit.
0702
Z-fold Position 2 Adjust the overall fold size of the Z-foldout sheets when
using the fold unit.
6. Adjustment Settings for Operators
164
To Next Page
Loading...
