Ricoh Pro C9210 - Page 165

No. Item Description
0605 Paper Alignment for
Stapling: With Feed
Adjust the Tip Stopper movement when using the staple
function applied at an angle on Finisher SR5050 or
Booklet Finisher SR5060.
0606 Number of Sheets Align for
Stapling
Specify the number of sheets to align for stapling at one
time.
0607 Punch Position: Across
Feed
Adjust the vertical position of the punch holes when using
Finisher SR5050 or Booklet Finisher SR5060.
0608 Punch Position: With Feed Adjust the horizontal position of the punch holes when
using Finisher SR5050 or Booklet Finisher SR5060.
0609 Punch Skew Correction Specify whether or not to correct the punch skew when
using Finisher SR5050 or Booklet Finisher SR5060.
0610 Amount of Punch Skew
Correction
Adjust the level of skew correction when using Finisher
SR5050 or Booklet Finisher 5060.
0611 Paper Alignment in Shift
Tray Setting
Specify the alignment precision of output sheets during
Shift Sorting when using Finisher SR5050 or Booklet
Finisher SR5060.
0612 Paper Alignment in Shift
Tray: Across Feed
Adjust the width of Paper Alignment Jogger
*1
on the
Shift Tray when sheets are ejected and delivered to the
Shift Tray of Finisher SR5050 or Booklet Finisher 5060.
0613 Output Tray Descending
Position
Specify the tray descent range according to the paper
weight when sheets are ejected and delivered to the Shift
Tray of Finisher SR5050 or Booklet Finisher SR5060.
0614 Exit Guide Close Timing Specify the timing to close the Paper Exit Guide when
sheets are ejected and delivered to the Shift Tray of
Finisher SR5050 or Booklet Finisher SR5060.
0615 Output Trail Edge Press
Setting
Specify whether or not to hold the trailing edge of sheets
when they are ejected and delivered to the Shift Tray of
Finisher SR5050 or Booklet Finisher SR5060.
0616 Output Fan Setting Specify the fan operation to the sheets on the Shift Tray
when sheets are ejected and delivered to the Shift Tray
of Finisher SR5050 or Booklet Finisher 5060.
Menu Items and Functions
163