Ricoh Pro C9210 - Page 194

Use the function to reduce the punch skewing caused by paper size, thickness, curl and so on.
To skew while punching, set [ ] to increase the correction level.
Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
A4 LEF
B5 JIS LEF
A5 LEF
A5 SEF
8
1
/
2
× 11 LEF
5
1
/
2
× 8
1
/
2
LEF
5
1
/
2
× 8
1
/
2
SEF
Other Paper Sizes
0.0 1.0 -1.0 0.5 mm
0611 Paper Alignment in Shift Tray Setting
Specify the alignment precision of output sheets during Shift Sorting when using Finisher SR5050 or
Booklet Finisher SR5060.
Use this function when the topmost sheet of the stacked paper is skewed.
Select [Accuracy Priority] to lower the shifting speed of the tray to reduce the skew caused by inertia.
Setting Items Values Default Value
Set Speed Priority
(Normal)
Accuracy Priority
Speed Priority
(Normal)
0612 Paper Alignment in Shift Tray: Across Feed
Adjust the width of Paper Alignment Jogger
*1
on the Shift Tray when sheets are ejected and delivered to
the Shift Tray of Finisher SR5050 or Booklet Finisher 5060.
Use the function to reduce the dispersion of paper orientation at a right angle due to paper size,
thickness, curl and so on.
Press [ ] or [ ] to increase or decrease the width.
6. Adjustment Settings for Operators
192