Printing > Custom Settings > Saving a Registered Custom Setting in a File
Saving a Registered Custom Setting in a File
Follow the procedure below to save a registered custom setting in a custom setting file.
● Under Windows 2000/XP, Windows Server 2003, or Windows NT 4.0, this function is unavailable.
Open the printer properties dialog box.
Click the [Setup], [Page Settings], or [Edit] tab.
Click [Manage...].
The [Manage Custom Settings] dialog box appears.
Select the custom setting you want to save.
Click [Save Custom Setting...].
The [Save Custom Setting] dialog box appears.
In the [File name:] box, enter a file name.
● Up to eight characters can be entered.
● The extension is .rst.
Click [OK].
The [Save Custom Setting] dialog box closes. The custom setting is saved in a custom setting file.
● Opening from the Start Menu
● Opening from an Application
Top Previous Next
Copyright © 2005 All rights reserved.
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/int/0067.htm2005/10/05 12:04:00
To Next Page
Loading...
