Ricoh Ri 100 - Loading a Fabric in the A4 Standard Tray

12
2
Printing on Fabric
Loading a Fabric in the A4 Standard Tray
This section explains how to load a fabric into the A4 standard
tray. The same operation applies when the A5 tray is used.
When attaching or removing fabrics in cassette, take care not to •
trap or injure your fingers.
When printing on thin fabrics, the ink may adhere to the table. Place
•
paper or something similar on the table before loading the fabric.
Press the [Power] key, and then turn on the machine.
• Detachthecassetteafterturningonthemachine.Ifyoude-
tach the cassette before turning on the machine, turn it off
first, and then turn it on again.
Make sure that the cas-
sette stand is out of the
machine, and then detach
the cassette.
• Ifitisnotoutofthemachine,
press the [Tray] key (Cas-
sette key) to eject the cas-
sette.
• Liftupthecassettelightlyandpullthecassettetodetachit.
DSB002