Ricoh Ri 100 - Head Position

49
5
Adjusts the print head. Perform this operation if printed lines
are vertically misaligned or printed colors are blurred.
To check adjustment values, print test patterns applying "Thick,
Standard", "T-shirt Fine", "T-shirt Speed", or "T-shirt Vivid" set-
tings.
If there are several lines in the test pattern, check adjustment
values for each line, and adjust the print head positions. If the
adjustment value is set to "0", adjustment is not necessary. Ad-
just all lines so their adjustment values indicate "0".
Load the print media in the cassette.
Pressthe[▼/Menu]key.
Pressthe[▲]or[▼/Menu]keytodisplay[Mainte-
nance], and then press the [#Enter] key.
Pressthe[▲]or[▼/Menu]keytodisplay[HeadPosi-
tion], and then press the [#Enter] key.
Pressthe[▲]or[▼/Menu]keytodisplay[Pr.TestPat-
tern], and then press the [#Enter] key.
Pressthe[▲]or[▼/Menu]keytoselectthetarget's
resolutions, and then press the [#Enter] key.
Press the [Start] key.
A test pattern to adjust print head positions is printed.
Machine Maintenance
Head Position