Ricoh Ri 100 - Head-Flushing

48
5
Follow the procedure below to perform a thorough print head
cleaning. Because head flushing consumes more ink than
head cleaning, do it only if the print head cannot be cleaned
properly by head cleaning.
When the ink cartridge is empty, replace it instead of perform-
ing a print head cleaning. After an ink cartridge is replaced, a
print head cleaning will be automatically performed.
Do not turn the machine off during print head cleaning. If the ma-
•
chine is turned off during print head cleaning, start again from the
beginning.
Pressthe[▼/Menu]key.
Pressthe[▲]or[▼/Menu]keytodisplay[Mainte-
nance], and then press the [#Enter] key.
Pressthe[▲]or[▼/Menu]keytodisplay[Head-flush-
ing], and then press the [#Enter] key.
Pressthe[▲]or[▼/Menu]keytoselectacolor,and
then press the [#Enter] key.
• Tocleanalltheprintheads,select[AllHeads].
• Tocleantheprintheadforcyanandblack,select[Head1].
• Tocleantheprintheadforyellowandmagenta,select[Head2].
Press the [#Enter] key.
Head flushing starts.
Press the [Escape] key until the top screen appears.
Machine Maintenance
Head-flushing