Tuck the edges of the fab-
ric under the table.
• Smoothoutthefabricsothat
no wrinkles or slack remain
on the print surface.
•Tuckthefabricsothatno
wrinkles or folds remain in
the area at the edges of the
table.
Make sure that no wrinkles or slack remain on the
print surface, and then close the cover. As you close
the cover, smooth away any wrinkles with your hand.
• Makesurethatthefabricfitsonthecassette.
• Whenusingtheoptionalfinisher,smoothwrinklesandflat-
ten fibers after loading the fabric in the cassette.
• Afterclosingthecover,makesurethatthefabricisloaded
so its surface is parallel to the cover.
To Next Page
Loading...
