Ricoh Ri 100 - Page 18

18
2
Move the detection lever in the direction shown in the
figure.
DSA349
Adjust the height of the multi tray table.
• Turn the four knobs counterclockwise on the underside of
the multi tray to release the lock, and then adjust the height
of the table. After adjusting it, turn the four knobs clockwise
to put the lock.
DSA353
•Whenloadingathin fabric (up to16mm(0.6inches)in
thickness), adjust to the top.
• Whenloadingathickfabric(16to32mm(about0.6to1.3
inches) thick), adjust to the bottom.
DSA350