22
2
Load the sleeve attach-
ment on the multi tray.
•Loaditatthebacksideof
the table, as shown in the
figure. Set the sleeve attach-
ment tightly to the back of
the multi tray.
•Detach the frame for press-
ing sleeves in advance.
Load the fabric on the
sleeve attachment.
•The image will be printed in
the direction from the front
side to the back side of the
cassette.
Load the frame for press-
ing sleeves on the sleeve
attachment, and then tuck
the edges of the fabric un-
der the table.
•Loaditsothatnowrinkles
or folds remain in the area
at the edges of the frame for
pressing sleeves.
• Makesuretopushdowntheframesothatitisplacedbe-
low the surface of the fabric.
To Next Page
Loading...
