Ricoh Ri 100 - Page 26

26
2
After the cassette returns to the front side of the ma-
chine, detach the cassette.
• Ifthe[Start]keyisstilllit,theprintinghasnotbeencomplet-
ed. Press the [Start] key again without detaching or remov-
ing the cassette from the machine. The printing will resume.
• WhenusingtheA4standardtrayorA5tray,insertthepro-
tection cover horizontally as illustrated in the figure, and
then remove it with the A4 standard tray or A5 tray. This
prevents you from touching the print surface. Make sure the
protection cover is correctly positioned horizontally.
DSA064
Exit the Design Software.
• By clicking [PrintOneMore],youcan configure the layout
settings again for the image loaded.
• Clicking [BacktoTOP]discards the loadedimage and re-
turns you to the top screen of the Design Software.
DSB024