Ricoh Ri 100 - Page 53

53
5
The optimal adjustment value
is the difference between the
single vertical line and the
cross's vertical line that you
can see when the folded sheet
is held up to light. When the dif-
ference is one calibration mark
in the "+" direction, the optimal
adjustment value for the [Read
Direction] is "+1.0".
Fold the test pattern sheet in half widthwise, and then
check the adjustment value for the [Feed Direction].
Adjustment values are in 0.1 increments.
Pressthe[▲]or[▼/Menu]keytodisplay[Adjustment],
and then press the [#Enter] key.
Pressthe[▲]or[▼/Menu]keytoentertheadjustment
values (-4.0–+4.0) in the [Read Direction] from Step 8,
and then press the [#Enter] key.
Pressthe[▲]or[▼/Menu]keytoentertheadjustment
values (-4.0–+4.0) in the [Feed Direction] from Step 9,
and then press the [#Enter] key.
Press the [Escape] key until the top screen appears.
ZKKX021J