Ricoh SH-P1 Series - Fusing Temperature Control

SH-P1 Training
82
Slide 82
Fusing Temperature Control
 When the main switch turns
on, the CPU turns on the
fusing lamp using the soft
start process. (The soft start
process prevents the room
lights from flickering.)
 The lamp stays on until the
thermistor detects the
standby temperature.
 Then the CPU maintains this
temperature using on-off
control.
 At the start of printing, the
CPU raises the fusing
temperature to the printing
temperature.
 At the "Reload" temperature, the user can start job input.