2. Release the extender locks on both sides of the tray, and then pull out the extender.
Make sure the extender's inner surface and the scale are aligned.
You can adjust the length of the extender in three steps. When using A4 or letter size paper, adjust
the length to the position indicated by the mark " " in the tray.
3. Pull out the extender and lock it.
4. Follow Steps 2 to 7 in "Loading Paper into Tray 1".
2. Loading Paper
48 opal-p2_mf2_com_user_guide_00142085_eng.xml
To Next Page
Loading...
Need help?
General
