Ricoh SP 212 SNw - Specifying Combined and 2-Sided Copies

PortraitLandscape
Original Copy
CMF261
Top to Top Top to Bottom
Top to Top Top to Bottom
Specifying Combined and 2-sided Copies
1. Press the [Copy] key.
DCT848
With Type 1 models, start from Step 2. If ID card copy mode is being displayed, press the [Shortcut
to Func.] key again to switch to normal copier mode.
2. Press the [ ] or [ ] key.
3. Press [Duplex/Combine].
4. Press the [ ] or [ ] key to select the desired copy mode, and then press the [OK] key.
5. Press the [ ] or [ ] key to select paper orientation and page order, and then press the
[OK] key.
The screen will show the selected copy mode.
4. Copying Originals
68