Ricoh SP 213Nw - Loading Paper into Tray 1

21
Configuring the IP Address Settings Using the Web Im-
age Monitor
Starting Web Image Monitor
Launch the Web browser.
In the address bar, enter "http://(machine's IP address)/".
IPv4 Address
Enter the IP address shown on the configuration page.
Use a computer using the IP address shown on the configuration page with its variable
part modified.
IPv6 Address
Enter the IP address shown in "Link-local Address" on the configuration page. Enclose the
IP address in square brackets, thus: "http:/[fe80:226:73ff:fe47:62e]/".
Configuring the Machine's IPv4 Address Automatically
Launch Web Image Monitor.
Click [Network Settings].
Click [Network Status].
Set [DHCP] to [Active].
DCT060
For details about configuring the IPv6 address, see the User Guide .
•
•
•