Ricoh SP 213SNw - Communication Settings

Communication Settings
• ECM Transmission
Sets the machine to automatically resend parts of the data that are lost during transmission.
Default: [On]
• Off
• On
• ECM Reception
Sets the machine to automatically receive parts of the data that are lost during reception.
Default: [On]
• Off
• On
• Dial Tone Detect
Sets the machine to detect a dial tone before the machine begins to dial the destination
automatically.
Default: [Detect]
(Default may be [Not Detect] depending on the [Country] setting under [Admin. Tools].)
• Detect
• Not Detect
• Transmission Speed
Specifies the transmission speed for the fax modem.
Default: [33.6 Kbps]
• 33.6 Kbps
• 14.4 Kbps
• 9.6 Kbps
• 7.2 Kbps
• 4.8 Kbps
• 2.4 Kbps
• Reception Speed
Specifies the reception speed for the fax modem.
Default: [33.6 Kbps]
• 33.6 Kbps
• 14.4 Kbps
• 9.6 Kbps
Fax Features Settings
opal-p2_mf2_com_user_guide_00142123_eng.xml 141
Draft 2014/01/07