Ricoh SP 220NW - How to Read This Manual; Introduction; Symbols Used in This Manual; Model-Specific Information

8
13. Enter the machine’s PIN code (8 digits) on the router (access
point)’s web page.(The web page accessed in Step 2)
14. Execute WPS (PIN system) from the router (access point)’s
web page.
15. Click [Connect].
16. Check the result.
Connection has succeeded:
The Power indicator lights up.
Connection has failed:
All the indicators start to flash simultaneously, and
after 30 seconds, only the Power indicator lights up.
Try the connection again.
17. Configuring the Wi-Fi settings is complete.