Ricoh SP 310 DN User Manual

3. Pinch the end paper guide and slide it inward to match the standard size.
CVW046
When loading custom size paper, position the paper guide slightly wider than the actual paper
size.
4. Load the new paper stack print side down.
Make sure paper is not stacked higher than the upper limit marked inside the tray.
CVW047
Slide the guides inward, until they are flush against the paper's sides.
Make sure the paper is not stacked higher than the projection on the side paper guides.
CVW032
Loading Paper
31

Ricoh SP 310 DN Specifications

General

Brand	Ricoh
Model	SP 310 DN
Category	Laser printer
Language	English