5. Check there are no gaps between the paper and the paper guides; both side and end
paper guides.
6. Carefully push tray 1 straight into the machine.
To avoid paper jams, make sure the tray is securely inserted.
• The remaining paper indicator on the left front side of the paper tray shows approximately how
much paper is remaining.
Extending the Tray 1 to load paper
This section explains how to load paper longer than A4 (297 mm) into the machine.
1. Remove the tray 1 rear cover by pushing its center.
2. Pull out tray 1 carefully with both hands.
Place the tray on a flat surface.
3. Release the extender locks on both sides of the tray, and then pull out the extender until it
clicks.
Make sure the extender's inner surface and the scale are aligned.
2. Loading Paper
32
To Next Page
Loading...
Need help?
General
