Smart Organizing Monitor
M154/M155/M174/M175/A0A7/M287/M0BB 5-24 SM
Vertical: Plain Paper
Adjusts the vertical registration of plain paper
for the bypass tray. If the machine settings are
reset to the factory defaults, this value does not
change.
[-40 to 40 / 0 (Default) / 0.1 mm/step]
Vertical: Thick Paper
Adjusts the vertical registration of thick paper
for the bypass tray. If the machine settings are
reset to the factory defaults, this value does not
change.
[-40 to 40 / 0 (Default) / 0.1 mm/step]
Vertical: Thin Paper
Adjusts the vertical registration of thin paper for
t the bypass tray. If the machine settings are
reset to the factory defaults, this value does not
change.
[-40 to 40 / 0 (Default) / 0.1 mm/step]
Registration:
Duplex Tray
Horizontal
Adjusts the horizontal registration the back side
in duplex mode. If the machine settings are
reset to the factory defaults, this value does not
change.
[-40 to 40 / 0 (Default) / 0.1 mm/step]
Vertical: Plain Paper
Adjusts the vertical registration of plain paper
for the back side in duplex mode. If the
machine settings are reset to the factory
defaults, this value does not change.
[-40 to 40 / 0 (Default) / 0.1 mm/step]
Vertical: Thick Paper
Adjusts the vertical registration of thick paper
for the back side in duplex mode. If the
machine settings are reset to the factory
defaults, this value does not change.
[-40 to 40 / 0 (Default) / 0.1 mm/step]
Vertical: Thin Paper
Adjusts the vertical registration of thin paper for
the back side in duplex mode. If the machine
settings are reset to the factory defaults, this
value does not change.
[-40 to 40 / 0 (Default) / 0.1 mm/step]